| NBR (NITRYLE) | Our standard Nitrile mixture contains 30% to 50% Acrylo Nitrile. Recommended for use up to -30 'C and +105 'C. It can be used up to +120 'C in short-term operations. It has very good resistance properties to vegetable and animal greases, light heating and diesel fuel. |
| FKM (VITON) | Viton is resistant to all types of grease, oil and solvents between -25 'C and +200 'C. Its resistance to many chemicals is very good. It gives very good results when low gas permeability is desired and in vacuum systems. |
| MVQ (SILICON) | Silicone maintains its elasticity between -60 'C and 200 'C. It is not recommended for dynamic applications. It has good resistance to ozone, air and oil. Oxidized oils, some hypoid and E.P. It has low resistance to type oils. |
| PTFE (TEFLON) | Can be used between -200 and +260 degrees. Thanks to its high wear resistance, it is suitable for use in applications requiring speed. It is extremely resistant to many products such as gasoline, alcohol and acid. |
| EPDM | EPDM It can be used between -40'C and +145'C. It has very good resistance to phosphate, ester fluids, automotive brake oils and steam. |
| HNBR | Can be used at temperatures between -30 and +150 degrees. Food-compatible raw materials are available. It is a product with high abrasion resistance. It is resistant to ozone, petroleum products, and mineral oils. |
| POLYURETHANE | Polyurethane (PU) It has excellent resistance to breaking, tearing and abrasion between -30'C and +100'C, and is resistant to air and ozone. It has good resistance to mineral oils, grease and aliphatic hydrocarbons. It is especially used as high pressure sealing element and shaft scraper. |